How To Install A Right Angle Power Strip In Tight Spaces

Image source

Angle Power Strip

Having a tough time figuring out where to put your power strip in a narrow gap or behind furniture like a couch? 

A right-angle power strip could make organizing and maintaining a tidy setup easier. 

Its innovative design allows the plug to sit flush, which helps save vulnerable space and prevents damage to cables in tight spaces. However, properly installing one requires a plan that balances locating the right installation spot, managing cables, and ensuring everything fits safely and snugly. 

But how to get it right?

If you are no longer satisfied with the messy cords and have no access to them, a beautiful and efficient power solution is in order.

Read on to find out how this guide is going to help you install your side outlet power strip perfectly so it can fit any small gap perfectly.

1. Choose the Location Carefully

To begin, consider the placement of your right-angle power strip. This is even more crucial in compact areas where safety and accessibility are major factors. 

Perhaps you are thinking of behind bulky pieces of furniture, under the table, or inside a cabinet; wherever you decide, ensure it is near an outlet. 

Also, make certain that the placement that you are using is safe and provides ample ventilation.

2. Measure Your Space

After identifying the location of your choice, proceed to pre-measure the space. Using a height gauge or a measuring tape, obtain the height, width, and depth of the area designated for the power strip. 

Even though right-angle power strips are slim, cavities can become rather hostile when they’re full of cords and connectors, as was the case here. 

Measurements taken precisely are bound to make the installation process easier as the unit won’t be forced to fit in a cramped space or tilted. This step reiterates not only your preliminary location decision but also confirms that the entirety of your setup passes as workable and is not too cramped for comfort.

3. Check the Power Strip Orientation

Image source

Prior to plugging any devices, see how the right-angle plug aligns with the designated wall cut-out. Ensure the plug can be fitted without covering the adjacent outlets and plugged in without forcing the wires to twist in a strange manner. 

Given that the right-angle design is meant to keep the power strip flat against a wall or furniture, take an observation test. This will ensure that the power strip can sit in an orderly fashion and will not block any other outlying plugs.

4. Mount the Power Strip (if desired)

If your power strip includes mounting holes, you may choose to secure it to a surface for added stability.

Firstly, choose whether you would like to mount it vertically or horizontally, and using screws or other provided mounting tools, mount it securely. It is also helpful to make the power strip mounted look straight by using a level so that it looks tidy. 

While drilling, pilot holes are made beforehand so as not to damage drywall or wood. In conclusion, an appropriately mounted power strip will save space while in a tough position, reducing clutter and the chance of accidents.

5. Plug In the Power Strip

Now, it’s time to plug the right-angle power strip into your wall outlet. Owing to its unique design, the plug will sit flat against the wall, minimizing the gap between your furniture and the outlet.

Furthermore, this design feature also decreases the likelihood of cables bending or pinching in confined areas. When you plug it in, you will immediately appreciate the space you save compared to a standard plug. Therefore, this action makes it easier to keep the area looking tidy while positioning furniture nearer to the wall, as there is no risk of damage to the cables.

6. Arrange Your Devices

Image source

Now that the power strip is plugged into the socket, plug it into your devices individually. 

Thanks to its right-angle design, the cables will fall in a clean line instead of protruding at the end or crimping at an odd angle. This feature reduces tangling and maintains everything in place. 

However, plug only what you need so you don’t crowd the strip. With all the equipment set up in the right place at this step, you maintain safety and ease of use so that your configuration is safe and neat.

7. Manage Cables

To keep your installation looking professional and organized, use cable clips, ties, or adhesive cable organizers. These tools help secure excess cable length and prevent wires from tangling or getting caught in tight spaces. 

This is especially important in cramped areas, as good cable management protects cords from damage and keeps your workspace clean. You can route cables along furniture edges or underneath desks, using clips to hold them firmly in place. 

Ultimately, taking the time to manage cables well will make your power strip installation safer and visually appealing.

8. Test the Setup

Finally, power everything on to test your new installation. First, switch on the power strip (if it has a switch), then turn on all connected devices individually. 

This ensures that your connections are solid and that the power strip is functioning correctly. Additionally, take a moment to check that the power strip feels secure where you mounted or placed it, and confirm that no cables are loose or overly strained. 

Testing at this stage guarantees that your effort resulted in a safe, efficient, and reliable power setup.

Conclusion

Now that you know how to install a right-angle power strip perfectly in tight spaces, you can transform your cluttered cords into a sleek, safe setup. With careful planning, precise measuring, and smart cable management, you’ll create an organized, accessible power hub that keeps your space neat and damage-free. 

Say goodbye to mess and hello to convenience!